Electric Vehicle Water Ring Vacuum Pump Comprehensive Performance Test Bench Automated Clamping 80m³/h Capacity
Short Description
The WPT-9 Pump Testing Equipment is an advanced automated test bench designed for electric vehicle water ring vacuum pumps. It integrates robotic clamping, full-performance simulation, and multi-condition testing, delivering high-precision, efficient, and traceable testing for OEMs and Tier 1 suppliers.
Product Introduction
WPT-9 sets a new standard in the field of electric vehicle vacuum pump testing. Equipped with a six-axis robotic clamping system and full-spectrum test environment simulation, it supports precise, automated, and repeatable testing for a wide range of pump models and configurations. Designed to meet international benchmarks, this system enables reliable performance validation under dynamic automotive-grade conditions.
Product Features
-
Automated Clamping System
Fast model switching (within 5 minutes) with ±0.1mm positioning accuracy, compatible with G1/4" to G3/8" pump ports.
-
Full Environmental Simulation
Simulates extreme temperature (-40℃~125℃), humidity (10%-95% RH), and pressure conditions, supporting AEC-Q100 and ISO standards.
-
High-Precision Measurement
Vacuum, flow rate, power, vibration, and noise are monitored in real-time. Vacuum accuracy reaches ±0.1kPa.
-
Data Management & Traceability
Real-time CAN/LIN data acquisition, 256GB SSD storage, PDF report generation for ISO 9001 compliance.
-
Advanced Safety Protocols
Dual-layer overpressure protection, vibration-based early failure diagnosis, and compliance with IEC 60664-1 and EVS-GTR standards.
-
Modular Design
Expandable with refrigerant loop (-50℃), high-pressure gas (up to 10 bar), and hydrogen embrittlement modules.
International Reference Standards
| Standard | Section | Description |
| ISO 28580:2013 | 5.3 | Vacuum-flow curve testing for EV pumps |
| GB/T 32864-2016 | 5.4, 5.7 | Electric pump efficiency & low-temp start |
| AEC-Q100 Rev-E | 5, 9 | Temperature cycle & vibration tests |
| IEC 60068-2-1 | Nb | -40℃ endurance (72h no failure) |
| EVS-GTR Phase 2 | 5.3 | Electrical insulation (≥10MΩ), 1500Vdc withstand |
| CISPR 25:2021 | Class 3 | Radiated EMI ≤40dBμV/m (30~1000MHz) |
Application Scope
Primary Test Objects:
-
EV water ring vacuum pumps (0.1–3kW, 5–80m³/h)
-
Hybrid vacuum booster pumps (oil/water-cooled)
-
Hydrogen fuel cell vacuum systems (high-pressure, anti-hydrogen embrittlement)
Core Test Categories
| Category | Test Items |
| Performance | Vacuum vs. Flow, Power vs. Efficiency, Recovery Time |
| Environment | Cold Start (-40℃), Heat Endurance (125℃), Salt Spray (48h) |
| Reliability | Durability (500h), Thermal Shock (1000 cycles) |
| Safety & EMC | Insulation, Ground Resistance, Radiated EMI |
| Automation | Clamping Accuracy, Seal Pressure Adaptability |
| Parameter | Details |
| Model | WPT-9 |
| Test Vacuum Range | 1–100kPa (±0.1kPa Accuracy) |
| Flow Rate Range | 0–80m³/h (±0.5%FS) |
| Temperature Range | -40℃ to +125℃ (±1℃ Accuracy) |
| Humidity Range | 10%–95%RH (Non-condensing, Optional) |
| Power Input for DUT | 12V / 24V / 48V DC |
| Drive Power Range | 0–3kW (0.1W Resolution, ±0.5% Accuracy) |
| Vibration Detection | 0–200m/s², 3-Axis (±5%) |
| Noise Range | 30–100dB (±1dB @ 1m) |
| Clamping System | Robotic Arm + Pneumatic Clamps (±0.1mm) |
| Control Interface | 12” Industrial Touchscreen (Multi-language) |
| Data Storage | 256GB SSD, 200,000+ Logs, CAN/LIN Output |
| Protection Rating | IP67 (Test Chamber), IP54 (Controller) |
| Power Supply | AC220V/380V ±10%, 50/60Hz, 80kVA |
| Dimensions | 3500×2500×2300mm (L×W×H) |
| Weight | 3000kg |
| Communication | CAN / LIN / RS485 / Modbus / OPC UA |
We provide comprehensive technical support, remote diagnostics, on-site training, and software updates. Our global service network ensures minimized downtime and optimal system performance.
Product photos
Product Tags:
|
|
Pump Testing machine Automated Clamping 80m³/h Capacity EV Water Ring Vacuum Pump Test Bench Images
|
